Epson Equity IIe, Руководство пользователя

Страница: 97 / 276

Entering an MS-DOS Command
To enter an MS-DOS command, you need to type the
command in the correct format. The command format provides
MS-DOS with the information needed to perform a task.
The MS-DOS command format consists of the command name,
parameters,
and
delimiters.
The command name tells MS-DOS
the task you want the computer to perform. Parameters specify
information such as what data you want to process and where to
locate or store a file. Delimiters are characters such as spaces or
commas that separate command names and parameters.
For example, the command to format a diskette in drive A is:
FORMAT A:
FORMAT
is the name of the command that tells MS-DOS to
execute the file FORMAT.COM. The
A
: is a parameter that
tells MS-DOS what to format-in this case, the diskette in
drive A. The space between
FORMAT
and
A
: is the delimiter
that allows MS-DOS to distinguish the command name
(FORMAT)
from the parameter
(A :).
Some commands also have optional switches you can use. A
switch is a type of parameter that changes the effects of a
command. A forward slash usually precedes a switch. For
example, suppose you want to format a 360KB diskette in a
1.2MB diskette drive. To do this, you add the following switch
to the FORMAT command:
FORMAT A: /4
If you do not add the /4 switch, MS-DOS tries to format the
360KB diskette as a 1.2MB diskette.
Using MS-DOS with Your Equity IIe
4-7