Epson Equity IIe, Руководство пользователя

Страница: 17 / 276

Chapter 1 provides simple step-by-step instructions for setting
up your system. On the back cover foldout are illustrations
identifying the different parts of the Equity IIe; you may want to
refer to this while setting up your system.
Chapter 2 describes how to run the Setup program to define
your computer’s configuration. You must do this for a new
computer before you use it. You may need to do it again later, if
you change the configuration.
Chapter 3 provides instructions for performing important
operating procedures, including using and caring for your disks
and disk drives.
Chapter 4 provides basic instructions for using MS-DOS with
your computer.
Chapter 5 describes some of the options you can use in your
Equity IIe and contains instructions for installing option cards
and changing jumper settings.
Appendix A contains troubleshooting tips in case you
encounter any problems while using your computer.
Appendix B provides information about the power-on
diagnostics.
Appendix C outlines the system diagnostics checks you can
perform on your computer. If you are having trouble with any
part of the hardware, you may want to run some of these
diagnostics checks.
Appendix D describes how to perform a hardware-level format
on a hard disk. You need to do this only if you have installed a
new hard disk that has never received this type of low-level
format, or if you are having serious problems with the hard disk
in your computer. (This is not the same type of format you can
perform with the MS-DOS FORMAT command.)
3