Epson Disc Producer PP-100 Скачать руководство пользователя

Страница: 83 / 151

Maintenance

Take the ink cartridge out of its package.

Use the label color to check where to set the ink cartridge, and gently push the new ink
cartridge into the ink cartridge holder on this product until you hear a click.

•

For optimum printing quality, open the clear plastic package only immediately before

installing. After opening the cartridge, try to use it up within six months. If you use an ink

cartridge that has been left open for a long time, the print quality may decline.

•

When you open the plastic package, be careful not to drop the ink cartridge. The ink

may leak out.

•

Do not leave the ink supply port on an ink cartridge facing downward. This could stain

the desk or other surface. In addition, dirt stuck on this product may prevent it from

functioning properly.

•

Do not shake the ink cartridge too hard. The ink cartridge may leak if you shake it too

much.

•

Do not touch the green IC chip attached to the ink cartridge. Also, never peel off the

labels and film attached to the ink cartridge. This could prevent you from properly

setting, operating, or printing with the ink cartridge, or ink could leak out.

•

Use up the ink cartridge before the expiration date printed on the box.

Do not repeatedly take out and put in an ink cartridge which has been set. Ink could stain

the ink cartridge or the product.

Do not touch the IC chip.

Click

Содержание Disc Producer PP-100
























































































































































Результаты поиска

Содержание Disc Producer PP-100

Отзывы:

Похожие инструкции для Disc Producer PP-100

Бренды по названию

Популярные бренды

Epson Disc Producer PP-100, Руководство пользователя

Результаты поиска

Содержание Disc Producer PP-100

Отзывы:

Похожие инструкции для Disc Producer PP-100

Бренды по названию

Популярные бренды