75
Convenient Features
Convenient Features
Printing on User Defined Label Size Discs
Set an arbitrary size if you print on discs whose label size is other than
Standard
and
Wide
.
The setting procedure of the user defined label size differs, depending on whether you publish with EPSON Total
Disc Maker or with the other applications.
When publishing with EPSON Total Disc Maker
Set in the dialogue that is displayed when you click
[
Set Inner/Outer Diameter
]
in Label view of EPSON Total
Disc Maker.
When publishing with the other applications
Set in the dialogue that is displayed when you set
Label Size
to
User Defined
, and then click
Adjustments
in the
Print Settings
area of the printer driver.
Setting item
Description
Inside Diameter
Set the inside diameter of the label. You can set a value within the range of 1.80
to 5.00 cm (180 to 500).
Outside Diameter
Set the outside diameter of the label. You can set a value within the range of
7.00 to 11.94 cm (700 to 1194).
Mask Rib Area
Check this to mask the rib area.
Rib refers to the protruding section of the disc inside circumference.
Masking the rib area enables you to prevent ink running onto the rib when a
printed disc and rib touch in the output stacker.
Rib Inside Diameter
Set the inside diameter of the rib area. You can set a value within the range of
2.70 to 5.00 cm (270 to 500).
Rib Width
Set the width of the rib area. You can set a value within the range of 0.01 to 1.15
cm (1 to 115).
Printing inside the rib area may result in ink getting on discs, discs sticking together, or
discoloration.
Setting the range outside of the recommended print area (inside diameter of 45.0 mm or
more and outside diameter within 116.0 mm) and printing may result in the discs or tray
becoming dirty, peeling off or blurring of the print, or discs sticking together. Check the
label print range of the discs you are using before configuring the setting. See
“Printable
Area” on page 53
for details on the recommended print area.
Notes
