Epson Disc Producer PP-100 Скачать руководство пользователя страница 109

Страница: 109 / 151

109

Troubleshooting

Disc Transferring (Input/Output) Problems

Symptom/Problem Status

Check/Remedy Procedure

The arm does not move.

Is there a foreign object (such as blue protective tape for transporting)

inside the product?

Press the power button to turn off the power, and then open the disc

cover and check that there are no foreign objects inside.

Unable to transfer a disc.

•

If a disc is not transferred from a stacker

1. Open the disc cover.

2. Take out discs from the input stacker.

3. Fully separate the discs to prevent them from sticking together and

load them back into the stacker.

4. Close the disc cover.

5. Retry to publish a disc.

•

If a disc is not transferred from the drive tray or the printer tray

1. Turn the product off.

2. Remove the disc from the tray. (See

“Disc Does not Come Out” on

page 127

3. Turn the product on.

4. Retry to publish a disc.

•

If the arm has picked up a disc

Do not remove the disc by hand, as the arm may be damaged. To

remove the disc, turn off the power and turn on the power again, and

let the initialization process remove the disc.

Unable to output a disc

Is there a foreign object (such as blue protective tape for transporting)

inside the product?

Press the power button to turn off the power, and then open the disc

cover and check that there are no foreign objects inside.

If the problem still cannot be solved, see

“Disc Does not Come Out” on

page 127

Unable to release multiple

disc feeds error

Is there a problem with the disc?

Multiple disc feeds error may occur depending on disc thickness or

warpage, even when multiple discs are not transferred. In that case,

follow the steps below to clear the error, and then retry using another

disc.

1. Open the disc cover.

2. Remove the disc from the tray.

3. Take out the discs from the input stacker.

4. Load another disc into the input stacker.

5. Close the disc cover and the job will resume.

Содержание Disc Producer PP-100
























































































































































Результаты поиска

Содержание Disc Producer PP-100

Отзывы:

Похожие инструкции для Disc Producer PP-100

Бренды по названию

Популярные бренды

Epson Disc Producer PP-100, Руководство пользователя

Результаты поиска

Содержание Disc Producer PP-100

Отзывы:

Похожие инструкции для Disc Producer PP-100

Бренды по названию

Популярные бренды