Basic Operation
34
Gap between Labels
When [Media Form] is other than [Continuous Label]
2 to 6 mm
Initial setting: 3 mm
When [Media Form] is [Continuous Label]
0 to 6 mm
Initial setting: 3 mm
Media Form
•
Die-cut Label (Gap) (Initial setting)
•
Die-cut Label (BlackMark)
•
Continuous Label
•
Continuous Label (BlackMark)
Media Saving
Enabled only when [Continuous Label] is selected as the [Media Form].
•
Eliminate Lower Margin
•
Eliminate Lower and Upper Margin
•
No Saving (Initial setting)
Media Coating Type
•
Matte Paper (Initial setting)
•
Synthetic
•
Glossy Paper
•
Glossy Film
•
High Glossy Paper
