Epson B11B263401, Руководство пользователя

Страница: 147 / 180

Items Settings and Explanation
Remote Authentication Method To select Certificate , you need to obtain and import a CA-signed certificate in
advance.
ID Type If you select Pre-Shared Key for Authentication Method , select the type of
ID for the device that you want to authenticate.
ID Enter the scanner's ID that matches to the type of ID.
You cannot use "@", "#", and "=" for the first character.
Distinguished Name : Enter 1 to 255 1-byte ASCII (0x20 to 0x7E) characters.
You need to include "=".
IP Address : Enter IPv4 or IPv6 format.
FQDN : Enter a combination of between 1 and 255 characters using A-Z, a-z,
0-9, "-", and period (.).
Email Address : Enter 1 to 255 1-byte ASCII (0x20 to 0x7E) characters. You
need to include "@".
Key ID : Enter 1 to 255 1-byte ASCII (0x20 to 0x7E) characters.
Pre-Shared Key If you select Pre-Shared Key for Authentication Method , enter a pre-shared
key between 1 and 127 characters.
Confirm Pre-Shared
Key Enter the key you configured for confirmation.
❏
Encapsulation
If you select IPsec for Access Control , you need to configure an encapsulation mode.
Items Settings and Explanation
Transport Mode If you only use the scanner on the same LAN, select this. IP packets of layer 4 or later are
encrypted.
Tunnel Mode If you use the scanner on the Internet-capable network such as IPsec-VPN, select this
option. The header and data of the IP packets are encrypted.
Remote Gateway(Tunnel Mode) : If you select Tunnel Mode for Encapsulation , enter a
gateway address between 1 and 39 characters.
❏
Security Protocol
If you select IPsec for Access Control , select an option.
Items Settings and Explanation
ESP Select this to ensure the integrity of an authentication and data, and encrypt data.
AH Select this to ensure the integrity of an authentication and data. Even if encrypting data is
prohibited, you can use IPsec.
Administrator Information
>
Advanced Security Settings
>
Encrypted Communication Using IPsec/IP Filtering
147