Epson AL-M7100 Series, Руководство пользователя

Страница: 61 / 98

The paper size setting is different from the size of paper
loaded in the printer. Check to see if the correct size of
paper is loaded in the specified paper source.
To clear this warning message, select Clear Warning
from the control panel’s
Reset Menu
.
Clear Paper Jam wwww
The location where the paper jam occurred is displayed
at
WWWWW
.
WWWWW
indicates the location of the error.
If a paper jam occurs at two or more locations
simultaneously, the corresponding multiple locations
are displayed.
For details about clearing paper jams, see “Clearing
Jammed Paper” on page 65 .
Close Cover wwww
The specified cover (
wwww
) does not close securely.
Open the cover once, and then close.
Collate Disabled
Printing by specifying the number of copies is no longer
possible due to a lack of memory (RAM). If this warning
message appears, print only one copy at a time.
To clear this warning message, select
Clear Warning
from the control panel’s
Reset Menu
.
Duplex Memory Overflow
There is not enough memory for duplex printing. The
printer prints only on the front and ejects the paper. To
clear this error, follow the instructions below.
If
Off
is selected as the
Auto Cont
setting on the control
panel’s
Setup Menu
, press the OK button to print on
the back of the next sheet, or cancel the print job. To
cancel the print job, see
“Cancelling a Print Job” on
page 55 .
If On is selected as the Auto Cont setting on the control
panel’s
Setup Menu
, printing continues automatically
after a certain period of time.
Face-down Full
Face-down tray is full of printouts. Remove the
printouts from the tray, then press the
OK button to
clear the error.
Feed Roller C1 Needed Soon, Feed Roller C2 Needed
Soon, Feed Roller C3, Feed Roller C4, Feed Roller C5
(AL-M8200/AL-M8100 Series only)
This warning message indicates that the indicated feed
roller is near the end of its service life. You can continue
printing until a message to replace the indicated feed
roller appears.
Filling Toner mm min
Wait mm minutes for the toner to fill.
Form Feed
The printer is ejecting paper due to a user request. This
message appears when pressing the
Pause/Release
button once, then holding down the OK button for
more than 2 seconds because the printer has not
received a form feed command.
Image Optimum
There is insufficient memory to print the page at the
specified print quality. The printer automatically lowers
the print quality so that it can continue printing. If the
quality of the printout is not acceptable, try simplifying
the page by limiting the number of graphics or reducing
the number and size of fonts.
To clear this warning message, select
Clear Warning
from the control panel’s
Reset Menu
.
Install Cassette1, Install Cassette2, Install Cassette3,
Install Cassette4, Install Cassette5 (AL-M8200/
AL-M8100 Series only)
The indicated paper cassette is either not installed or not
closed. Install it or close it.
Install Toner Cartridge
The toner cartridge is not installed in the printer.
Install the toner cartridge. See the instructions that
come with the toner cartridge.
Install Waste Toner Box
The waste toner box is not installed in the printer. Install
the waste toner box. For details, see the
Setup Guide or
the instructions that come with the toner cartridge.
Invalid Data
AL-M8200/AL-M8100/AL-M7100 Series User's Guide
Troubleshooting
61