Epson AL-M200 Series, Руководство пользователя

Страница: 150 / 232

PS Data Format
Purpose:
To set the PS data communications protocol. To make any changes effective, turn off the printer and
then turn it back on.
Values:
Auto
* Sets the PS data communications protocol automatically.
Standard Sets the PS data communications protocol to Standard .
BCP Sets the PS data communications protocol to BCP .
TBCP Sets the PS data communications protocol to TBCP .
*
Factory default menu setting
System Settings
Use the
System Settings
menu to configure a variety of printer features.
Power Saving Timer
Purpose:
To specify a time period before the printer enter each power saver mode.
Values:
Low Power
Timer
1min
*1 By default, the printer enters Low Power mode in one
minute of inactivity after completion of the last job.
You can change the
Low Power Timer setting within
a range from 1 to 45 minutes.
1min - 45min
Sleep Timer
6min
*1 By default, the printer enters Sleep mode in six
minutes of inactivity starting from the moment it
entered Low Power mode. You can change the
Sleep
Timer setting within a range from 6 to 11 minutes.
6min - 11min
AL-M200 Series User’s Guide
Using the Operator Panel Menus 150