Epson AL-M200 Series Скачать руководство пользователя страница 195

Страница: 195 / 232

If this trouble happens, contact our local representative office or authorized dealer.

Mottle

Problem

Action

The printed result has mottled
appearance.

Adjust the transfer bias.

1. Launch the Printer Setting Utility, click

Adjust BTR

on the

Printer Maintenance

tab.

2. Adjust the setting for the type of print media being used.

3. Click the

Apply New Settings

button.

If you use non-recommended print media, use the print media recommended for
the printer.

Note:

If the problem continues even though you have taken suggested actions described above, contact our local
representative office or authorized dealer.

Ghosting

AL-M200 Series User’s Guide

Troubleshooting

195

Содержание AL-M200 Series









































































































































































































































Результаты поиска

Содержание AL-M200 Series

Отзывы:

Epson AL-M200 Series, Руководство пользователя, Страница: 195 / 232

Результаты поиска

Содержание AL-M200 Series

Отзывы: