Epson AL-M200 Series, Руководство пользователя

Страница: 149 / 232

InternetServices Disable Disables an access to EpsonNet Config embedded in the printer.
Enable
*1 Enables an access to EpsonNet Config embedded in the printer.
Bonjour(mDNS) Disable
Disables the Bonjour (mDNS).
Enable
*1 Enables the Bonjour (mDNS).
*1
Factory default menu setting
*2
WSD stands for Web Services on Devices.
IP Filter
Note:
The IP Filter feature is available only when
Protocol
is set to
LPD
or
Port 9100
.
Purpose:
To block data received from certain IP addresses through the network. You can set up to five IP
addresses. To make any changes effective, turn off the printer and then turn it back on.
Values:
No.n/Address (n is 1 - 5.) Sets the IP address for Filter n .
No.n/Mask (n is 1 - 5.)
Sets the address mask for Filter n .
No.n/Mode (n is 1 -
5.)
Off
* Disables the IP Filter feature for Filter n .
Reject
Rejects an access from the specified IP address.
Accept Accepts an access from the specified IP address.
*
Factory default menu setting
Initialize NVM
Purpose:
To initialize wired network data stored in Non-Volatile Memory (NVM). Enabling this feature and
rebooting the printer will reset all the wired network settings to their factory default values.
Values:
Yes Initializes the wired network data stored in NVM.
No
*
Does not initialize the wired network data stored in NVM.
*
Factory default menu setting
AL-M200 Series User’s Guide
Using the Operator Panel Menus 149