Epson Aculaser C9200N, Руководство по обслуживанию

Страница: 27 / 441

EPSON AcuLaser C9200N Revision D
PRODUCT DESCRIPTION List of Printer Messages 27
Confidential
Figure 1-8. cover
Invalid CompactFlash
Error
The installed CompactFlash
cannot be used on this printer or
it is a CompactFlash of less than
4 GB, or "No" is selected when
"Format Required" occurred.
This error also occurs under the
following conditions for a
CompactFlash with the
password lock function.
†
Password lock has failed.
†
Could not unlock the
password lock.
†
Turn off the printer, remove
the CompactFlash, and turn
on the printer.
†
Select "Yes" to format the
CompactFlash when "Format
Required" occurs.
Can't Print Duplex
An error resulted as printing was
specified with conditions where
duplex printing is not possible.
†
This error is cleared by
pressing the Start/Stop
switch and the printer prints
in simplex.
†
When Auto Continue is on,
simplex printing starts after a
certain interval.
†
If printing does not continue,
cancel the job.
Turn Paper Cassette 1
(2,3,4)
An error occurred because the
width of the paper set in the
feeder device was narrower than
the width set for printing. With
this printer, the error occurs
when the following conditions
are met at the same time.
†
The width of the paper size
specified for printing is
210.00mm or more.
†
The paper set is less than
210.00 mm wide.
The envisioned situation is when
normally horizontally set A4,
A5, B5, or LT is mistakenly set
vertically.
†
When the specified paper
size is correct
Remove the paper from the
cassette displayed and set the
correct paper. The error is
cleared and printing starts.
†
When the set paper is correct
Cancel the job for which the
error occurred, and resend
the data with the correct
paper size specified.
Table 1-7. Error Message and Troubleshooting
Message Explanation Remedy
cover F
cassette 1 (C1)
cassette 2 (C2)
cassette 3 (C3)
cassette 4 (C4)
cover E2
cover E3
cover E4
MP tray
cover A
cover B
cover D
cover H
paper path G