Epson 7850p - PowerLite XGA LCD Projector, Руководство пользователя

Страница: 81 / 224

Presenting Through a Wireless Network
81
3. For Key ID, highlight any of the options and press
Enter
if you’re
using 40 bit WEP encryption. (This option is not available for
128 bit WEP encryption.)
4. Highlight the
Encryption key
text box and press
Enter
. The
cursor turns green to indicate you are in input mode. Check with
your network administrator for directions on entering a key for
your network, and follow these general guidelines:
■
For 128 bit WEP encryption with hexadecimal input, enter
26 characters, from 0 to 9 and from A to F.
■
For 40 bit WEP encryption with hexadecimal input, enter 10
characters, from 0 to 9 and from A to F.
■
For 128 bit WEP encryption with text input, enter 13 letters
of the alphabet.
■
For 40 bit WEP encryption with text input, enter 5 letters of
the alphabet.
5. When done making your settings, highlight the
OK
button at the
top of the screen and press
Enter
. On the next screen, highlight
the
OK
button again and press
Enter
to return to the EasyMP
Network Screen.
Continue with the section below to set up your Windows computer
for wireless projecting, or go to “Setting Up Your Macintosh for
Access Point Mode” on page 87.
Configuring the Network Settings for Windows
Before connecting to the projector, you need to make sure the settings
for your computer’s wireless card or adapter match the settings you
entered for the projector.
1. Access your wireless network Properties window. For example, in
Windows XP you would click
Start > Control Panel > Network
and Internet Connections
. Then click the
Network
Connections
icon.
note
To enter numbers with the
remote control, press the
Num
button. When it lights
up, numeric keypad mode is
active. Press the
Num
button again to exit numeric
keypad mode.
Text input for WEP
encryption varies with
different access points; check
with your network
administrator. Try
Text1
first. If that doesn’t work,
try
Text2
and then
Text3
.