Epson 7850p - PowerLite XGA LCD Projector, Руководство пользователя

Страница: 45 / 224

Using the Remote Control
45
■
Use the pointer button to move the cursor on the screen.
■
Press the
Enter
button to left-click, or press it twice to
double-click; press the
ESC
button to right-click.
■
To drag-and drop, hold down the
Enter
button for about one
second until it lights. Then use the pointer button to drag the
object. When it’s where you want it, press
Enter
to release it.
■
Use the
Page
buttons to move through a slideshow.
Enabling Password Protection
To prevent unauthorized use, you can assign the projector a password.
If you do, a screen will appear requesting the password whenever the
projector is plugged in. If an incorrect password is entered three times
in succession, the projector’s operation is locked and the power cord
must be disconnected and reinserted to redisplay the password screen.
If an incorrect password is entered nine times in succession, the user
must contact the dealer to unlock the projector.
The default setting for the Password Protect function is off. Follow
these steps to turn password protection on:
1. Press the
Freeze
button on the remote control for about five
seconds.
Page up or down
to change slides
in PowerPoint
note
It’s a good idea to write your
password down. Also, make
a note of the “Request
Code: xxxxx” number that
appears in the Password
Protect Release screen. If you
do forget the password, you’ll
need this code when you
contact the dealer.
If you leave the projector
plugged in, the Password
Protect Release screen will
not appear. You only need a
password if you unplug and
reconnect the power cable.