ePropulsion SPIRIT 1.0 Series Скачать руководство пользователя страница 30

Страница: 30 / 48

3. Put the throttle to zero (stop) position and press

"SELECT" button. "CAL BA" will be display.

4. Rotate the throttle backward to full power

position and press "SELECT" button, the

display will return to normal and the calibration is
completed.

E50

Charger Fault

If you are not using an ePropulsion charger, please
change an ePropulsion charger. If this condition
persists, please contact your dealer.

E51

Battery

Temperature

Fault

Make sure the environment temperature is within
0°C to 45°C. Charging will continue when cell
temperature is in that range.

E54

Battery Pack

Over Voltage

Stop the motor and wait until the error message
disappears. If the problem persists, contact your
dealer for repair.

E55

Battery Empty

Indicating the battery is empty. The outboard can
probably be restarted at lower speed after the
message is dismissed.

E56

Battery Charging

Over Current

Restart the motor and drive at lower speed. If this
problem still persists, please contact your dealer.

E57

Battery

Discharging Over

Current

Battery can only work between -20°C and 60°C.
Motor can be started again after the battery
temperature is within that range.

E58

Battery

Hardware Fault

Batter y has encountered serious hardware
breakdown. Please replace the battery and contact
your dealer.

E59 Battery Cell Fault

Battery cell fault occurs, please replace the battery
and contact your dealer to repair the problemetic
battery.

Other

Other faults

Please contact your dealer.

Carry out the throttle calibration procedures in strict accordance with the
above sequences.

Содержание SPIRIT 1.0 Series
















































Результаты поиска

Содержание SPIRIT 1.0 Series

Отзывы:

Похожие инструкции для SPIRIT 1.0 Series

Бренды по названию

Популярные бренды

ePropulsion SPIRIT 1.0 Series, Руководство пользователя

Результаты поиска

Содержание SPIRIT 1.0 Series

Отзывы:

Похожие инструкции для SPIRIT 1.0 Series

Бренды по названию

Популярные бренды