ePropulsion SPIRIT 1.0 Series, Руководство пользователя

Страница: 29 / 48

27
5.2 Error codes and solutions
When the outboard is running in abnormal conditions or malfunctioning, a
warning message will display with an error code. The table below will help you
get a solution.
Code Description Solution
E01
Motor Over
Voltage
Stop the motor and wait until the error message
disappears. If the problem still exists, contact your
dealer for repairing.
E02
Motor Over
Current
Disconnect the battery and check if the motor is
blocked. If not, continue driving at low speed. If this
issue cannot be solved, please contact your dealer.
E03/
E04
Motor
Overheating
Wait a few minutes until the motor cools down and
the warning message disappears.
E05
Motor Under
Voltage
Indicate the battery level is extremely low. The
outboard can probably be restarted at lower speed
after the message is dismissed.
E10 Motor Blocked
Disconnect the battery and remove anything that is
blocking the motor. Make sure the propeller can be
rotated by hand smoothly.
E20
Battery
Communication
Fault
Turn off the motor and reconnect the battery cable.
If this issue cannot be solved, please contact your
dealer.
E21
Motor
Communication
Fault
Turn off the motor and reconnect the battery cable.
If this issue cannot be solved please contact your
dealer.
E30
Throttle
Calibration
Required
Calibration process:
1. Press and hold "SELECT" button (≥10secs) until
"CAL Fo" is displays.
2.Rotate the throttle forward to full power position
and press "SELECT" button. "CAL ST" will
display.