ePropulsion SPIRIT 1.0 Series, Руководство пользователя

Страница: 34 / 48

32
Step3:
Select a desired trim angle and insert the trim pin into the
corresponding position, attach the pull ring to fix the trim pin.
Step3: Put the trim pin into
the desired position.
Figure 7-3
Step4:
Pull the trim release lever again to lay down the outboard motor, and
the outboard motor will stay at the desired trim angle.
Figure 7-4
Step5: Try to tilt up the outboard and test if the angle is successfully fixed.
It is recommended to try different trim angles to help find the best working
trim angle for the boat and operating conditions. Please increase the speed
gradually during test, watch out for water cavity and other instability problems,
if the problem gets serious, stop the outboard immediately and try to reduce
the trim angle.