ePropulsion SPIRIT 1.0 Series, Руководство пользователя

Страница: 15 / 48

13
For protection considerations, the motor will stop immediately if the battery
voltage drops below the critical level during operation or when running.
To keep electric connectors in good condition, please spray the connectors
about every 3 months with contact spray.
To store the outboard motor, put the machine in original ePropulsion
package and keep it in a dry and ventilated place without direct sun
exposure.
2.2 Battery
The SPIRIT Battery specially designed for SPIRIT 1.0 can only be charged with
an ePropulsion original charger. The battery has a built-in battery management
system which provides cell balancing function, over charging protection, over
discharging protection, short-circuit protection, over temperature protection,
under temperature protection, over current protection, communication function,
etc. Though the battery has been tested to be reliable and safe during normal
operation, it should be handled with care as safety is critically important.
Please adhere to the following instructions when using it.
Do not drop, strike or squash the battery.
Do not disassemble the battery or conduct unauthorized repair, the battery
disassembly can only be conducted by ePropulsion service.
Never charge a broken or damaged battery.
Only charge the battery with an ePropulsion original charger.
Do not charge the battery near flammable materials like carpet or wood.
Disconnect charger when not in use.
Though the battery is IP67 waterproof, it’s suggested not to immerse it in
water or store it in moist environment.
Keep conductive objects away from the discharging port and charging port
to avoid damage of electronic components.
Use the port cap to avoid accidental short-circuit.
WARNING