ePropulsion SPIRIT 1.0 Series Скачать руководство пользователя страница 46

Страница: 46 / 48

3. The defective components or parts will be either repaired or replaced

according to the diagnosis made by the ePropulsion authorized service
partner.

4. If your warranty claim is accepted, the equipment will be repaired or replaced

free of charge. Note that any delivery cost incurred in the process is at your
charge.

After careful examination and confirmation by ePropulsion authorized dealer,

the defective or faulty components will be repaired or replaced with brand
new ones against the actual condition.

6. In case your warranty claim be rejected, an estimated repair charge with

round trip delivery cost will be sent for confirmation. ePropulsion authorized

service point will conduct maintenance accordingly only after your

confirmation.

If warranty expires, you can still enjoy maintenance serivces from
authorized ePropulsion service partners with minimum maintenance
charge.

Содержание SPIRIT 1.0 Series
















































Результаты поиска

Содержание SPIRIT 1.0 Series

Отзывы:

Похожие инструкции для SPIRIT 1.0 Series

Бренды по названию

Популярные бренды

ePropulsion SPIRIT 1.0 Series, Руководство пользователя

Результаты поиска

Содержание SPIRIT 1.0 Series

Отзывы:

Похожие инструкции для SPIRIT 1.0 Series

Бренды по названию

Популярные бренды