ePropulsion NAVY 6.0 Series, Руководство пользователя, Страница: 41 / 56

39
Battery Configuration Process LCD Displaying
Step1: First, turn on the main switch and the
Remote Control/Tiller.
Then, press “ ” button and hold to enter the
preference setting page.
Next, press “ ” button and hold again to
enter the battery setting page. Users can see
the voltage value blinking and it’s ready for
configuration.
Step2: Press “
” button and skip to the next
item: battery type.
Choose the battery type according to the
battery you use.
Pressing “
^
” button to switch the battery type
options between Pb, Li and LFE.
Pb: Lead-acid battery Li: Lithium battery
LFE: Lithium-ion ferrous phosphate battery
Step3: Press “
” button to save battery type
and skip to the below battery capacity setting
item.
Press “
^
” button to change the value and set
the battery capacity according to the battery
you use.
Note that the unit of capacity is “Ah”, usually the
capacity of battery is expressed in “Wh”, and
we can get the capacity in “Ah” by following the
below formula:
Capacity in Wh
Capacity in Ah =
Nominal voltage in V
Eg. if users use a 3000Wh Lithium battery
with 48.1V nominal voltage, then the battery
is about 62.37Ah, so you can set 62Ah as the
capacity setting.