ePropulsion NAVY 6.0 Series, Руководство пользователя, Страница: 28 / 56

26
It’s recommended to charge the Remote Control/Tiller by solar power.
5.2.2 Charging by wired connection
If the Remote Control/Tiller can’t get enough solar power for a long time, the
battery level will run out. In this case, a warning message with an error code
E60 (Figure 5-4) will display on the LCD panel to remind you to charge the
Remote Control/Tiller.
Figure 5-4
Please follow the below steps to charge the Remote Control/Tiller by wired
connection.
First, connect the Remote Control/Tiller to the outboard motor by a
communication cable first (Figure 5-5/Figure 5-6);
Then, connect the outboard motor to the battery.
Communication Cable
Figure 5-5
* The communication cable needs
to be purchased separately.