ePropulsion NAVY 6.0 Series, Руководство пользователя

Страница: 35 / 56

33
However, if the Remote /Tiller or the outboard motor is not replaced, but
the LCD panel still displays like this, you should check and:
1) Make sure the Remote is not far from the outboard motor;
2) Make sure all the equipment involved is normally powered on.
If the Remote /Tiller still displays like Figure 5-12 after check, it indicates
an error has occurred. Please contact your dealer for repair.
There are two pairing methods. Please choose one proper method and
follow the procedures.
a. Wireless Automatic Pairing
Step1: Switch off both NAVY outboard and Remote Control/Tiller.
Hold the remote within 0.5m to the head part of the outboard
，
or
mount the tiller to the outboard.
Step2: Pess and hold the “ ” button on the Remote or Tiller to switch on.
Step3: Press “ ” button and hold 5s to enter the pairing setting page
(Figure 5-13). On this page, you can find blinking “ ” (address)
and “ ” (set), and a countdown timer “ ” (60s).
Figure 5-13
Step4: Switch on NAVY power. Wait for them to get paired in a few seconds.
Step5: After pairing, the LCD screen will display as Figure 5-14 for 5s, then
returning to home page automatically.
Figure 5-14