Serial Port Configuring
95
VGA Grid User Guide
To shut down the system:
1.
Log into the Web admin interface.
2.
Select
Maintenance
.
3.
Select
Shutdown
now.
12
Serial Port Configuring
The System can be integrated with control equipment that uses an RS-232 interface.
This RS-232 interface is used to trigger the device to perform various actions by
sending a command over the RS-232 connection, refer to the RS-232 Commands
chapter for more information about these commands.
To connect your control equipment to the VGA Grid, use a standard RS-232 null-
modem cable. Then an RS-232 serial adapter is connected to the RS-232 null-modem
cable before inserting it into one of the two USB ports on the System.
The standard VGA Grid package does not include an RS-232 serial adapter but one
can be purchased from Epiphan as an optional accessory.
Flow control is the only configurable item for this feature. This is done by navigating
to the Serial Port section of the Web admin interface.
Table 18 Configuring the Serial Port Feature
Flow control
Flow control means the ability to slow down the flow of
bytes in a wire. For serial ports this means the ability to
stop and then restart the flow without any loss of bytes.
Specify by what means this control will be performed:
-
Hardware
-
Software
-
None
Содержание VGA Grid
