System Administration
88
VGA Grid User Guide
The following table summarizes the configurable options for setting the date and
time.
Table 17 Date and Time Configurable Options
Time Zone
Select the appropriate time zone
Enable time
synchronization
This parameter enables time synchronization with a NTP
or RDATE server
Protocol
Select the time protocol
Server IP
Address
Enter the IP address of the NTP or RDATE server
Update interval
Specify the frequency of time synchronization
Set time
manually
This parameter enables manual time setting
Date (yyyy-mm-
dd)
Specify the date
Time (hh:mm:ss) Specify the time
RTC calibration:
(-31..+31).
This field allows RTC calibration, the slowing or speeding
the clock up to 10 sec/day. Negative numbers slow the
clock down up to 5 seconds a day and positive numbers
speed up the clock up to 5 seconds a day.
11.2
Users and Passwords
11.2.1
Configuring the Administrator User Password
Initial factory settings provide no password for the administrator user. For security
reasons, a password to control access to the administration functions should be
added. The administrator user’s password can be added or changed at any time in
the
Admin Access
section.
If you lose or forget the admin password you can reset the device to its factory
default setting. See
Restoring the System Default Factory Configuration
the device to factory defaults.
Содержание VGA Grid
