Networking
85
VGA Grid User Guide
relevant IP address to the VGA Grid. This section describes how to re-enable DHCP
settings if they have been disabled.
1.
Log into the Web admin interface.
2.
Select
Network
from the main menu.
3.
Select
Use DHCP
. The other fields can be left as is.
4.
Select
Apply
to save these changes.
5.
Select
Maintenance
.
6.
Select
Reboot Now
. It takes a few minutes for the VGA Grid to reboot.
7.
After a few minutes log into the Web admin interface. Logging into the
Web admin interface can be done by:
a.
See the section Network Discovery of the System on how to obtain
the IP address for VGA Grid.
b.
Using a browser and browsing to the new IP address assigned to
VGA Grid.
c.
Using the Network Discovery Utility, see the section Logging into
the Web Admin Interface Using a Web Browser and the IP Address
of the for more details.
8.
Re-log into the Web admin interface using the administrator username and
password.
The following diagram shows the network page from the Web admin interface and
enabling DHCP.
Содержание VGA Grid
