Configuring using a Third-Party Application
105
VGA Grid User Guide
Status Line Value
RECTL STATUS {UP <time>|DOWN
<time>|UNKNOWN}
Status of the recording
RECTL MICVOLUME <0-100> Level of line-in amplification (percents)
RECTL PCMVOLUME <0-100> Level of line-out amplification (percents)
Each status line is terminated with an LF (ASCII code 10) character.
18.3
Syntax for HTTP API Commands
You should use the
channel
parameter in URL, where
N
is zero-based channel index.
Use the following syntax to get configuration settings:
http://<address>/admin/channelN/get_params.cgi?key
Use the following syntax to set or change the configuration:
http://<address>/admin/channelN/set_params.cgi?key=value
In this example
<address>
is the IP address or name you use to connect to the
System admin interface.
E.g., if you log into the VGA Grid’s Web admin interface using
http://192.30.23.45/admin, then <address> would be 192.30.23.45.
Key
is the name of the object of the VGA Grid to be viewed or changed. See the next
section
for more information on the valid values for
key
.
V
alue
is the value to be set. Some values include spaces, for example, the frame
size can be 1024 x 768. Use %20 for spaces, for example:
framesize=1024%20x%201068
You can include multiple <key>or <key>=<value>statements in one URL. Separate
the statements with
&.
Содержание VGA Grid
