background image

3. Windows VGA2Ethernet user interface

Recording, Display, KVM, and Sharing Options

Page 60

VGA2Ethernet

About Setting the Display Format

For best results you would usually set the display format color 

depth to match the video source color depth. If the display format 

and video source color depth do not match, the VGA2Ethernet 

user interface converts the color resolution of images as they are 

received. This conversion can put extra demands on the video 

capture workstation CPU.

Note: 

For a definition of color depth, see 

“Color depth, bits per 

pixel (bpp)” on page 61

.

There are a number of reasons you may want to set the display 

format to a different color depth than the video source. For 

example:

Flip image 

vertically

Select this option to turn the displayed image 

upside down. If you select this option, the image in 

recorded videos, the image that is copied when you 

select Copy from the Edit menu, printed images, 

and broadcasted images are also upside down. 

Images saved by selecting Save from the File menu 

and recorded image files are not affected by this 

option.

Optional 

status bar 

Indicators

Configure the display of optional indicators on the 

status bar.
• Select 

Frame rate

 to show the number of frames 

per second received by the VGA2Ethernet user 

interface. 

• Select 

Number of captured frames

 to show the 

total number of frames or images displayed by 

the VGA2Ethernet user interface since the 

application was last started. You can select 

Reset 

Counter

 to restart counting the number of 

captured frames.

• Select 

Data rate

 to show the amount of data 

received by the VGA2Ethernet user interface in 

MB/s, KB/s, Mbps, and Kbps.

Содержание KVM2Ethernet





























































































































































































Отзывы: