2. Installation and Getting Started
VGA2Ethernet and KVM2Ethernet Hardware Features
User Guide
Page 13
Power
Connect the AC adapter to the device power
connector and to a power outlet.
ETH 1
Primary 10/100/1000 Base-T RJ-45 auto-sensing
Ethernet network port to connect the device to the
Ethernet network. The ethernet ports are auto-
sensing. You can connect ETH 1 or ETH 2 directly to
the video capture workstation Ethernet port.
ETH 2
Secondary 10/100/1000 Base-T RJ-45 auto-sensing
Ethernet network port. This port is useful for some
configurations. For example, see
Ethernet Bridge For Use if You Have Only One
Ethernet Connection” on page 112
.
VGA IN
Connect a VESA-compatible VGA source to the
VGA2Ethernet device. See the
information about the video input supported by the
VGA2Ethernet device.
Connect an Epiphan KVM cable from the machine
to be managed to the KVM2Ethernet device. See the
KVM2Ethernet technical specifications
on the
Epiphan web site for information about the input
supported by the KVM2Ethernet device.
VGA OUT
Optionally connect a monitor. This is not a high-
quality image. VGA OUT is intended only for
checking the presence of the signal.
USB port
Not used.
LED
startup
sequence
Green and blue LEDs. When the device first starts
up, the blue led lights up. A few seconds later the
green LED lights up. After about another 20 seconds
the blue LED turns off, leaving the green LED on
indicating that the device has started up and can
start capturing images.
During operation the blue LED blinks during VGA
signal test operation and when the system tunes
VGA parameters.
Содержание KVM2Ethernet
