There are two 4” (100 mm) exhaust ports at the
back of the machine. Connect a 350 CFM
exhaust fan to the ports and vent to the outside.
Other Functions
Light Switch
– The light switch controls the
internal lighting of the cabinet.
Set edge guides:
Move the edge guides to match the field. The
G2 is oriented so that the 0,0 “Home” position is
in the upper left corner of each of the three
different fields.
The three fields are offset from each other
creating a 0,0 “Home” position that is in a
different position for each field size.
Move the edge guides to the corresponding
field location. The edge guides fit into holes in
the table and can be lifted straight out when
relocating.
