Printing to the G2 Using the
Epilog Software Suite
Important Information:
The G2 software suite is the print interface between your computer and your G2 galvo
system. It consists of two separate components that allow you to print to the G2 galvo
system:
Dashboard
– The Dashboard is the
primary “print driver” for your G2 galvo
system. When printing to the G2 galvo all
laser functions will initially be set in the
Dashboard.
Once your initial settings have been
established you can choose to print
directly to the G2 or you can send the job
with all laser settings to the JM (Job
Manager).
The Dashboard is described in detail later
in this document.
Job Manager
(JM) – The Job Manager
acts as a file management system that
saves all print jobs sent to the JM. The
JM can store, recall and reprint any
previously printed job.
All laser settings can be reconfigured
from the JM.
The JM is described in detail later in this
document.
