Epilog G2 Keypad
The instructions below describe the functions of the keys on the G2 keypad. Please be aware that some
keys have multiple functions.
Jobs Menu
Lists Jobs that have been sent to the laser in the
order they were sent. Press this key and use the
joystick to scroll through the available jobs at the
laser.
Data Transfer
Illuminates only when a job is being transmitted
to the laser system.
Focus
Pressing this key allows you to manually raise or
lower the table to the desired focus. After
pressing the FOCUS key you will use the joystick
to raise and lower the table to your desired
height. The display will show you the table
position in thousandths of an inch or millimeters.
•
Pressing and holding the FOCUS key for 3
seconds will activate two visual indicators
to help you focus your product. The
visual indicators consist of a red dot and
a red line. Raise or lower the table with
the joystick so the small red-dot is
centered in the vertical red line that is
projected onto the table.
