EPAK DSi13Ku Pro, Инструкция по установке и эксплуатации

Страница: 25 / 32

To see details about your account, click on the user-icon on the top-right side of your screen. You will be
redirected to your account details. Here you can view your username, shortname and status. You can also
view you recent login history on this page. If you are the “admin” user, you can view the login history for other
users as well.
User Management
The user management page is accessible by clicking on the user button on the left side of the screen. In this
section you can view the current login-name, short-name, other account creation details. Here you can also
change password and short-name. The admin user can add, delete, enable/disable a new user.
User Permissions
The permissions page is limited to use by the admin user. It is accessible by clicking the permissions button
on the left side of the screen. The admin user can set the page permissions for each page for every user in
this section. To save the changes, click on the “
Apply ” button at the top of this page.
5.5 Service Activation
Once the antenna has locked on to the correct satellite, the antenna transmit path needs to be calibrated on
first use. This has to be done in coordination with your service provider. So, to continue with this process,
please contact us or your service provider directly, so that they can perform P1db compression test and
activate your internet services.
5.6 Maintenance
The EPAK VSAT system is easy to maintain. The following instructions are sufficient to sustain an optimal
performance of the antenna unit:
• Clean the radome once a month using fresh water and a mild detergent to remove dirt and salt deposits.
• Do not operate the antenna without the radome.
• Do not clean the radome with a high-pressure washer or high pressured water from a hose.
• Check cable connections to be tight and free of corrosion. Clean the cables regularly.
The radome has a protective layer of UV-stabilized and maritime climate-proof coating. Do not apply any
additional paint, wax, preservative, solvent, chemicals or adhesive labels. Do not use alcohol or dilution or
similar products to clean the radome. Any kind of additional coating will void warranty claims. In case any
solvent comes in contact with the radome by accident, rinse the area immediately with water and, if
Doc ID 0304 03.07.20
Page 25/32