EPAK DSi13Ku Pro, Инструкция по установке и эксплуатации

Страница: 22 / 32

To check the system logs,
navigate to the left hand
side menu, and click on
Log . The syslog contains
a more general overview
of the system and
operation system status.
Most recent entries can
be seen on the top. The
log messages can give
more information about
the current state of the
system.
5.3 System Configuration
This section is used to configure the modem settings, the ACU network interfaces, select beams, add the
satellite information, or update the antenna.
5.3.1 Configuration -> Modem
You can change the modem
configuration by clicking on
Configuration -> Modem. In this
section, you can select the modem
type, the IP address type
(static/DHCP) and the IP address of
the modem. The system selects a
default IP address for you. However,
please change the IP address based
on the option file or configuration file
of your current modem. You can also
select the OpenAMIP configuration if
your modem supports this protocol. If
you do not find the correct modem
type in this list, please contact EPAK
for more details.
If your current modem has a traffic
VLAN IP address, please fill in the
details for this as well.
5.3.2 Configuration -> Network
Interfaces : In this section, you can
configure the IP addresses of each
Network interface and also select 2
DNS servers for your system.
Doc ID 0304 03.07.20
Page 22/32