EP Equipment EPT20-15ET, Руководство по обслуживанию

Страница: 98 / 128

REV. 09/2016
ELECTRICAL SYSYTEM
8
87
Parameters Description Remark
Temp Check the temperature of controller Display the current temperature (
℃
)
Battery Voltage Check the voltage of storage battery Display the current voltage ( V )
Motor Voltage Check the voltage of motor Display the current voltage ( V )
Motor Thermal Cutback Check the capacity of motor current Display the current capacity ( % )
Armature Current Check the motor current Display the current value ( A )
Current Limit Check the maximum limit current Display the current value ( A )
Resistance Check the resistance of system Display the current resistance (
mΩ
)
Throttle Check the input of accelerator Display the current capacity ( % )
Speed Limit Pot Check the input of limit speed Display the current capacity ( % )
Mode Input Check the status of speed mode switch
If the function is triggered properly,
the value will change
Reverse Input Check the backward status of travel switch
If the function is triggered properly,
the value will change
Inhibit Check the status of interlock switch
If the function is triggered properly,
the value will change
Push Input Check the status of push switch
If the function is triggered properly,
the value will change
Main Contactor Check the status of main contactor
If the function is triggered properly,
the value will change
Brake Check the status of brake
If the function is triggered properly,
the value will change
BDI Check the capacity of battery Display the current capacity ( % )
Drive Time Check the working time Display the current working time ( h )
8.9.4 TESTER Menu
The parameters in Monitor Menu are real-
time presentation of the running status of the
equipment.
Traction Controller (1212)