EP Equipment EPT20-15ET, Руководство по обслуживанию

Страница: 24 / 128

13
REV. 09/2016
MAINTENANCE
2
Table 2.1 Inspection & Maintenance List
Interval in days/months/years 7 d 60 d 90 d 6 m 1y
Interval in hours 50 250 500 1000 2000
Functions and Control
Check the functions of the operation switches and
display
A
Check alarm system functions A
Check interlock switch functions A
Check the emergency switch functions A
Check the cables for damage and if the terminals are
secure
A
Check the lifting limit switch functions A
Check and tighten the controllers and contactors A
Check fault information records and operating hours A
Power Supply & Drive System
Check the battery cables for damage and replace if
necessary
A
Check the battery charge connector A
Check if the cable connections between battery mon-
omers are secure, apply some grease to electrodes if
necessary
A
Check the position of various bearings for noise A
Clean or add the gear grease A / L
Check the gearbox for abnormal noise or leaks A
Check and lubricate the bearings between drive motor
and gearbox
A / L
Check the drive wheel and load wheel for worn or
damage
A
Check the wheel bearings and fi xation A
A = Check / Adjust
Please refer to Inspection & Maintenance List
for regular inspection and maintenance of the
vehicles.
L = Lubrication
Under harsh conditions, the lubrication intervals
should be shortened by half.