EP Equipment EPT20-15ET, Руководство по обслуживанию

Страница: 23 / 128

12
REV. 09/2016
MAINTENANCE
2
-
-
-
-
2.2 Maintenance
2.2.1 Cleaning
Do not use flammable liquids to clean the
truck.
Before starting to clean, all necessary
security measures must be taken to prevent
sparking (short circuit) during operation. If the
truck is powered by battery, battery plug must
be pulled out.
When cleaning electrical and electronic com-
ponents, you should use low-intensity suction
gas or compressed dry air. Meanwhile, clean
the dust on the surface of components with
non-conductive and antistatic brush.
Do not use vapor steam to clean the equipm-
ent.
2.2.2 Inspection
Regular inspection and maintenance under
normal conditions of use:
Operating
Hours (h)
Requirements
50 At least once per 7 days
250 At least once per 60 days
500 At least once per 90 days
1000 At least once every 6 months
2000 At least once per year
When the truck is at running-in phase (after
approximately 100 hours of operation), the
equipment user must check the fastening of
wheel nuts and bolts and re-tighten them if
necessary.
Regular inspection and maintenance under
harsh conditions of use:
Under harsh working conditions, especially:
-
Dusty environment
-
Corrosive environment
-
Cold storage environment
The maintenance intervals should be shortened
by half.
CAUTION