19
GB
A handle has been mounted at the end of
the stand tube to make height adjustment
easier (Fig.5). The irradiation device can still
be turned steplessly by 360°.
To do this, loosen the operating handle on
the device
fi xture slightly and turn the irra-
diation device to the required position. Then
lock the operating handle again (Fig.6).
360°
Note! Ensure that the cable output on the
irradiation device is always pointing down-
wards in turned and vertical operating posi-
tion, as the cable must not come into contact
with hot device components.
Caution! Only move or adjust the fl oor lamp
in cooled condition. Risk of burn injuries!
If positioning the device above a bed or
stretcher, ensure that
the minimum clear-
ances to the body and to the furnishings
can be maintained even if the device is ad-
justed.
Fig. 6
Operating
handle
Bottom cable
output
The horizontal arm of the stand must
be always on the same side as the U-shape
feet!
To prevent the unit from overturning do not
rotate the horizontal arm around the axis of
the stand (Fig. 7).
Fig. 7
