18
GB
Assembling the IRelax onto the stand
The required mounting or assembly materi-
als are enclosed in the packages IRelax Art.
Nos.: 94.4761 00 or 94.4762 00.
In order to mount the irradiation device onto
the stand, please insert the two slot nuts into
the rear-side, centre housing keyway acc.
Fig. 2.
Fig. 3
Now secure the entire irradiation device us-
ing the two M 6x16 screws and the A6 spring
rings to the device fi xture (Fig.4).
Now fi x the connection cable for the irradia-
tion device using the two velcro fasteners
in order to avoid contact between the con-
nection cable and the device housing during
operation.
890
=
=
160
The slot nuts can be pivoted and can be re-
moved from the slot again if necessary. You
may required a screwdriver to do this (Fig.3).
The slot nuts serve as an assembly and po-
sitioning aid. In order to guarantee the spring
function, they should be bent up slightly be-
fore being reinserted.
Adjusting the device position
The IRelax
fl oor lamp is movable and can
therefore be transported easily to any loca-
tion.
The two rear stand wheels are equipped
with a special locking device which prevents
the device being moved during operation.
The stand is steplessly adjustable via a
pneumatic spring. It can be adjusted to any
height between 120 and 200 cm by releas-
ing the
fi xture handle on the stand tube, and
then locked by engaging the fi xture handle in
the required position (Fig.5)
Fig. 2
120 - 200 cm
Fig. 5
Slot nuts M6
Handle
O p e r a t i n g
handle
Stand wheels
with locking de-
vice
Fig. 4
