14
GB
17:10
P 1
20:03
17:10
You are now familiar with the program
parameters needed for a sauna bath.
With this sauna control unit you may also
personalize the settings for your sauna
system.
Once you have chosen these settings, they
will be applied after every restart.
These settings are altered on the "F"-level,
i.e. "F" appears for each corresponding
function selection on the display.
Using the selection buttons
and
you
can now set heating time.
Please consider, though, that the cabin
needs 40-50 minutes for warming up, to
create a pleasant climate in the cabin. For
example, if you wish to take your sauna
bath at 6 p.m., then you should set the
startup time to 5:10 p.m.
Confirm the selected time by holding the
"MODE" button. P1 briefly appears on the
display.
As long as P1 is shown on the display,
press the
button to start the delayed
start-up sequence.
After a short time, the display alternates
between current time and startup time. The
display illumination goes out.
When the pre-selected start-up time is
reached, the sauna switches itself on.
After the designated heating time it then
shuts itself back off automatically.
