10
GB
Unit initialization
After checking all connections once more,
connect the unit to the power supply by
switching on the fuse and the main switch.
On the display appears
and the clock symbol begins to blink.
After a short time (30 seconds) you can
start with programming.
You may now set the current time using the
and
buttons during the blinking of
the clock symbol.
To accept the selected time, press the
MODE-button until the selected time
begins to blink.
Briefly F1 appears on the display.
After that, the current time is displayed and
the unit is ready for operation.
F 1
Turn on the unit by pressing the left
button.
Simultaneously, this turns on the cabin
lighting and the backlit display.
Display readout
Mode
Mode
Mode
12:00
