12
GB
If you wish to end your sauna bath
prematurely, press the
button.
The symbol on the display then disappears.
Mode
Important notes when programming
Every modification of the preset parameters
must be confirmed by pressing the "MODE"
button.
If you do not press the "MODE" button,
the unit will automatically default back to
the previous parameters.
If you do not touch the unit for a longer
period of time during programming, the
display will default back to standard and
the illumination will cease after a short
time.
If you wish to individually set the heating
time for your sauna system, press the
"MODE" button and choose P2 using the
selection buttons
or
.
Press the "MODE" button again.
Now you may set the heating time using
the selection buttons.
Confirm your input by holding the "MODE"
button pressed continuously until the new
heating time and the symbol expire on the
display.
Afterwards P2 shortly appears, then the
display returns to default readout. The
maximum heating time now matches the
entered value until changed again (re-start
required).
03:00
P 2
Heating time limiter
