Recessed installation
1. Cut out a wall section that is at least 3.5 cm
deep according to the dimension in Fig. 5.
Insert the supplied rubber grommets into the
openings at the rear wall of the housing and
insert the connecting cables through these
openings.
Place the control unit into the wall opening and
fasten it with 4 wood screws.
Ey
e lev
el
Fig. 5
Fig. 6
Feed-through for:
Mains cable
IR cable
Lamp
Feed-through for:
sensor lines
21 cm
20 cm
Holes to fasten the control
unit inside the wall opening.
10
EN
