background image

5

EN

General safety precautions

• 

This device can be used by children aged 
8 upwards and by persons with physical, 
sensory, or mental disabilities, or who 
have inadequate experience and knowl-
edge if they are supervised or if they have 
received adequate instruction in how to 
use the device safely and understand the 
associated risks. Children may not play 
with this device. Children may not clean 
or carry out any user maintenance if un-
supervised. 

• 

Children are to be supervised in order to 
make sure that they do not play with this 
device.

• 

!

Attention: It is forbidden to install 

the control box in a closed switch cabinet 
or behind a wooden panelling!

• 

The electrical installation may be done 
only by a qualified electrical technician.

• 

You must comply with the regulations of 
your power supply company and the ap-
plicable local legal regulations, such as 
e.g. VDE regulations (DIN VDE 0100).

• 

!

 WARNING: Never attempt repairs or 

installations by yourselves, as this could 
result in serious injury or death. Only a 
qualified technician is allowed  remove 
the housing cover.

• 

Please note the dimensions in the assem-
bly instructions, especially when installing 

the temperature sensor. The temperature 
above the oven is critical for the temper-
ature setting. The temperature can be 
held within operating parameters and a 
minimal temperature gradient inside the 
the cabin can be achieved only if unit is 
installed correctly.

• 

The device may only be used as intended 
as a control unit for IR radiators or IR heat-
ing foils.

• 

!

 Only the IR radiators or heating foils 

with the integrated overheating protec-
tion 140°C compliant with the EN 60335 
norm are permitted to be used.

• 

Completely disconnect the control unit 
from the electrical circuit, i.e. flip all circuit 
breakers or the main circuit breaker during 
each installation or repair. 

• 

Please observe the safety and installation 
information of the manufacturer of the IR 
heating equipment.

• 

Make sure to also observe the specifica-
tions and instructions of the cabin manu-
facturer.

Содержание ECON I1



































Отзывы: