EOS 94 7371 01, Инструкция по установке и эксплуатации

Страница: 50 / 56

EN-50 Installation and Operating Instructions - EOS Zeus S / EOS Zeus SL
EN Maintenance
6.4 Troubleshooting
Error Reason Solution
It takes the heater a long
time to heat up the cabin. Some tubular heating
elements are defective. Replace the tubular heat-
ing element or heating
coil. See
6.3 Replacing the tubular
heating elements,

EN-43.
There is not enough
space between the
stones. Reshuffle the stones. See

Reshuffling the sauna
stones,

EN-42.
There is insufficient venti-
lation. Install the air inlets. If
these are insufficient, add
a fan to the openings. See
3.1.2 Air inlets and
outlets,

EN-19.
The heater is very hot but
cannot distribute the
heat throughout the
cabin. There is not enough
space between the
stones. Reshuffle the stones. See

Reshuffling the sauna
stones,

EN-42.
The safety temperature
limiter was triggered and
the heater no longer
heats. The safety temperature
limiter was triggered by
heat accumulation. Check the inlets, outlets,
and the fan and ensure
that the heater has access
to a sufficient amount of
air.
Replace the safety tem-
perature limiter.
The position of the tem-
perature sensor with the
safety temperature lim-
iter is not optimal. Check the position of the
temperature sensor and
adjust as needed. See
3.2 Temperature
sensor,

EN-22.
Replace the safety tem-
perature limiter.