EOS Zeus S / EOS Zeus SL - Installation and Operating Instructions
EN-41
Maintenance
6
Maintenance
This sauna heater is made of low-corrosion material. To ensure a long ser-
vice life, perform regular maintenance and service on your heater.
Ensure that openings in the intake area and heat reflectors are never
blocked. These can easily become blocked with lint and dust as fresh air is
drawn in. This limits the air convection ability of the heater and could lead
to impermissible temperatures. Clean the heater as needed.
If you do not use your sauna for a longer period of time, ensure that at the
time of recommissioning no towels, cleaners or other objects are lying on
the heater.
Contact your sauna retailer or the manufacturer directly if you notice mal-
functions or signs of wear and tear.
6.1
Cleaning the heater
The heater must be cleaned regularly. The cleaning frequency depends on
how often it is used.
Clean the heater only with household cleaners.
Check the sauna stones and replace as needed.
Cleaning
1
Switch off the heater from the control unit.
Wait until the heater is completely cool, if necessary.
2
Clean the outside of the heater.
Use only household cleaning agents.
3
Remove lint and dust from openings and heat reflectors.
Openings can easily become blocked with lint and dust as fresh air is
drawn in. This limits the air convection ability of the sauna heater and
could lead to impermissible temperatures.
