EN-24
Installation and Operating Instructions - EOS Zeus S / EOS Zeus SL
EN Installation
Setting up the heater
1
CAUTION! The heater weighs between 62 and 68 kg, depending on the
model. Two people should always move the heater, or a lifting device
should be used.
Remove the transport protection and lift the heater from the pallet. Then
move it to the pre-defined installation site.
2
Unscrew the 3 adjustable feet 25–35 mm until the heater is level.
Use a spirit level if needed to ensure that the heater is level.
3
Remove all transport locks and protective films in the heater.
4
If air is supplied from below, check that the slots are in the correct posi-
tion.
The slots are bent upward approx. 45° during heater manufacturing.
5
Place the stone grate and decoration ring in position and screw them
tight.
25–35 mm
