EOS Zeus S / EOS Zeus SL - Installation and Operating Instructions
EN-29
Installation
4
Mount the fixing inserts with the small plates on both sides:
a)
Screw the adjustment sleeves (
G
) on to the hex screws until they stop.
5
Lift the heater rail over the outer casing and lower it onto the heater.
6
Insert the heater rail with the inner, centred pin (Ø 6 mm) in the bushing
of the front bracket.
7
Insert the lateral fixing inserts in the pre-milled pockets of the heater rail
and tighten the crosshead screws (
F
) into the wood.
8
Rotate the adjustment sleeves (
G
) for the back brackets until the spacing
is the same on all sides.
E
Pre-mounted small plate
F
Pan head screws
G
Adjustment sleeve
F
E
G
