2
4 – Programmable Remote Guide
1. Hold the “down” button until the base reaches its lowest
position.
2. Release the “down” button.
3. Hold the “down” button again until the display states
“RST”.
5. Hold the “down” button again until the base lowers slightly,
then raises back up.
6. Release the “down” button. The base is now ready to use.
1. Adjust the base to the desired height.
2. Press “M” followed by the desired preset number.
3. The preset is now set for that height.
1. Adjust the base to the desired maximum height.
2. Hold down the “M” button until the display states “S-”, then
release the “M” button.
3. Press the “up” button, then release. Hold the “M” button
until the display flashes “999” then
changes to display the height.
4. The maximum height is now set.
Resetting the base
Memory Control Instructions
Setting Upper Limit
