3
4 – Programmable Remote Guide
1. Adjust the base to the desired minimum height.
2. Hold down the “M” button until the display states “S-”, then
release the “M” button.
3. Press the “down” button, then release. Hold the “M” button
until the display flashes “000” then
changes to display the height.
4. The minimum height is now set.
1. Hold down the “M” button until the display states “S-”, then
release the “M” button.
2. Within five seconds, hold down the “M” button again for
two seconds.
3. The display will flash “555”, then change to display the
height.
3. The upper and lower limits are now removed.
1. Hold the “M” button until the display switches from “S-” to
“LOC”.
2. The control is now locked.
Setting Lower Limit
Removing the Upper and lower Limits
Locking the control
