4
4 – Programmable Remote Guide
1. Hold the “M” button until the display switches from “LOC”
to the height display.
2. The control is now unlocked.
Unlocking the control
5 – Troubleshooting
Perform reset procedure if base is not functioning properly
or if legs are uneven.
If the display states “RST”, perform reset procedure.
If the display indicates an error message (“ER1” – “ER13”),
confirm all wired connections are secure (legs to cables,
cables to control box). Then perform reset procedure.
If the display states “HOT”, let base cool down for twenty
minutes before use.
Resetting the base will require lowering past any
set lower limit. Ensure there are no obstructions
underneath the base while resetting.
WARNING
